UVWX - High Intensity, High Speed, UV LED Curing System
Need a sales representative?
A Powerful UV LED packing up to 23W/cm2 with our unique, wide-band lenses for faster curing and production speeds.
Easily customized to cover any area or integrate into any work cell via PLC controller.
Easily serviced in-house, keeping your maintenance costs AND production line downtime LOW.
Efficient water cooling for superior LED lifespan
Ideal for Fast UV Adhesive/Epoxy Curing in Automotive Manufacturing
This unit is ideal for high-speed UV printing and curing on any scale. With the ability to “stack” and combine multiple units, you can customize your design to cover large areas and large work distances.
Our cutting edge, high-density LED boards and lens technologies maximize the area of illumination. Maximizing this area of exposure maximizes the cumulative (or integrated) irradiance of these lights, meaning your conveyors can move faster.
This UV LED curing light can be easily attached to a robot in order to cure irregular lines of UV-curable material, or implemented in any production line for high-speed and/or small space production.
A traditional irradiator, with very narrow working area of illumination
Our irradiators. Combining dense LED arrays and our lens technology, we can increase the area of irradiance. This increases the integrated intensity of the light, allowing you to boost conveyor speeds and cut production times.
Common Applications -
Curing waterproof silicone of building materials
Printing products such as golf balls
Curing protective film on a substrate
Curing gaskets and rubbers
Automobile production
It easily achieves a minimum of 10W/cm2 with a single unit. But to understand the power and flexibility, consider this. Combining 4 1UNITS creates a 4UNIT, which can irradiate a 70 x 40mm area at 2W/cm 2 at a distance of 100mm . That’s powerful.
View the second image in the gallery above for a better idea of irradiance distribution and strength.
| UVWX - 1 Unit | |
|---|---|
| Work Area | 50x20mm |
| Common Work Distance | 10-50mm |
| Wavelength and Irradiance | 23W/cm2 at 385 & 395 nm, 16W/cm2 at 365nm |
| UVWX - 8 Units | (An example - your line can use as many units as desired) |
|---|---|
| Unit width | 8 units = 400mm x 20mm (extendable in 50mm increments) |
| WD | 10 mm |
| Wavelength and Irradiance | 23W/cm2 at 385 & 395 nm, 16W/cm2 at 365nm |
With a work distance of 10mm, and wavelength of 385 or 395nm, and a conveyor speed of 100 m/min, the calculated illuminance is 240 mJ.
With a work distance of 50mm, and wavelength of 385 or 395nm, we can still achieve 8W/cm2.
